Since your tandem axle trailer has a 7K GVWR this means that you have 3.5K axles that use the following parts:
Inner Bearing - # L68149
Inner Race - # L68111
Outer Bearing - # L44649
Outer Race - # L44610
Grease Seal - # 58846 (1.719" inner diameter)
EZ Lube Grease Caps - # RG04-040
The bearings, races, and seals can be found in this kit # BK2-100, so all you'd need are the grease caps # RG04-040 to round out everything you need. Be sure to check what you currently have because even... view full answer...
For each of your Lippert 3500lb axles you will need the following components.
Timken Inner Bearing & Race # TMK73VR Qty 2
Timken Outer Bearing & Race # TMK23VR Qty 2
etrailer Grease Seal # 58846 Qty 2
Grease Caps # RG04-040 Qty 1
We do not carry a Timken grease seal or caps in the size you need for your Lippert axle. view full answer...
We definitely carry those! For those parts, you need 2x of the # RG04-080 and 1 of the # DC250L-DCRP. I went ahead and attached helpful demo videos of these products for your convenience. view full answer...
The bearings we have, # L44643, and the associated race is # L44610. The cotter pin is # 165649. The dust cap associated with hubs that take these bearings is # RG04-020 for a pair. The seal on the other hand is an odd size. There isn't a bearing kit that has the seal that you need and it is an odd size that we do not carry. But it is readily available at auto parts stores.
I know that a kit would make things a lot easier but in this situation there isn't a kit that has the seal and dust... view full answer...
We have Bearing Buddy Bearing Protectors that are the 2.240 inch you referenced but they are not threaded. They are part # BB2240SS for stainless or # BB2240 for chrome plated. If you don't want to replace your hubs to utilize those, then the best option is to keep your oil cap as a grease cap and you can still change over to grease.
For the bearings, races, and seal, you will want the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100. You may also... view full answer...
If the TruRyde Bearing Kit with Grease Cap # DL21792 that you referenced uses the correct matching bearing set for your trailer (two of # L44643) then the included matching seal may fit. All components are matched for the BT8 spindle. This seal, # 34823, is a compatible cross-reference for the Transcom 12192. Its inner diameter is 1.249 inches and is outer diameter is 1.983 inches. You can measure your hub's inner bore to determine if this seal's outer diameter matches. view full answer...
The bearings you need are # 387A and # 25580. Races needed are # 382A and # 25520. The oil cap kit you need is part # RG04-300.
If you need a seal too you would need the part # 10-51. view full answer...
We offer a tool for installing bearings, races and seals, kit # PTW83020 from Performance Tool. This is intended for installing these items but it could also work to get them out of your hubs. Sometimes mechanics will use a socket or piece of pipe sizes to the hub bore for removing old races, bearings and seals. Please refer to the linked video.
We also offer dust cap driver tools, shown on the linked page. These are used for installing grease caps/dust caps like # F001503. view full answer...
The only way to know for sure is to check your bearings. That being said, the most common 4-bolt configuration is a 4 on 4 bolt pattern, which are typically found on 2,000 lb to 2,700 lb trailer axles. The only 4 on 4 bolt pattern hub and drum assemblies we carry are for 2,200 lb axles and use # L44649 inner/outer bearings. See below.
Compatible with 7 inch x 1-1/4 inch electric and hydraulic brakes
# 8-173-16UC3 - Includes bearings, races, grease seal, standard grease cap and lug nuts.
#... view full answer...
It sounds like you're looking for the Bearing Kit with Grease Cap for 1" BT8 Spindles part # DL21792 which comes with two bearings, two races, a grease seal, cotter pin, and grease cap. It has everything you need for one side of an axle. It doesn't however come with a castle nut so for that you'd need the Trailer Spindle Nut 1" part # 165686. view full answer...
The Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009 # 8-430-5UC3 comes as the complete kit and the hub/drum is not available separately. The bearings, races, seals, and caps are available separately:
Inner Bearing # 387A
Outer Bearing # 25580
Inner Race # 382A
Outer Race # 25520
Oil Seal # 10-51
Oil Cap Kit # RG04-300 view full answer...
Yes, the Dexter axle part number 4003321 you referenced works with the hub and drum assembly part # 8-201-5UC3-EZ which is a 5,200 pound axle. The hub pattern is 6 on 5-1/2.
The parts you will need are inner bearing # 25580 (4) and outer bearing # LM67048 (4). You will need seals # RG06-090 and dust cap # RG04-080. The seal and dust cap will come as a pair.
I have included a FAQ and multiple videos for you too. view full answer...
For your wheel bearing, races, and seals, I don't have the dimensions available. For a precise fit, I'll need you to give me the inner diameter and the outer diameter measurements of your bearing.
Most 4 lug hubs use the same bearings so it is a good possibility that the TruRyde Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal # DL21792 may fit. I've attached a video of this kit for you. view full answer...
I was able to find everything you need for your 12,000 lb Dexter axles; the electric brakes, oil cap kit, oil seal, bearings, and races. I verified with Dexter that these are indeed the correct parts for your 12k axles. I'll go ahead and list out each of the parts you need to make it easier to order:
- Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 12,000 lbs # AKEBRK-12L
- Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand... view full answer...
The diameter of the pilot hole - where the grease cap will be - of the Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 6 - Agricultural # 42660UC1 is 2.446 inches.
The correct grease cap to use with this hub is Grease Cap # F001520.
This hub does not come with bearings, races, grease seal or cap so you will also need Bearing Kit # BK3-300.
This kit has all the correct bearings, races and seal for this hub. I have added links to video reviews for you to check out as well. view full answer...
A trailer hub assembly will use an inner bearing and race, an outer bearing and race, a grease seal, a cotter pin, and either a dust cap or a bearing protector. I am including a picture that will show where the part numbers are located and the areas that you will need to measure if your parts do not have part numbers etched on them.
There is only one grease seal on the spindle and it is located on the rear of the hub assembly (see picture).
Looking up the grease seal number CR12427 on... view full answer...
For your 2017 Karavan KB2200 boat trailer you will need the following parts for rebuilding your hubs.
Inner Bearing # L68149
Outer Bearing # L44649
Inner Race # L68111
Outer Race # L44610
Grease Seal # TMK29ZR
Cotter Pin # 165649
If the Sure Lube cap is damaged during removal you can replace them with the superior Bearing Buddy Bearing Protectors # BB1980A-SS. view full answer...
We have the bearings and seal that you would need, but they are not available in a kit.
For bearings you would want the # L44649, for races part # L44610, and then for a seal you would need part # 13194.
I attached a help article on replacing bearings, races, and seals on a trailer hub for you to check out as well. view full answer...
The Kodiak Disc Brake Kit, part # K2HR712, that you referenced will fit axles that are rated for 7,000 lbs that use a #42 spindle. It will work with 16 inch and larger wheels that use an 8 on 6-1/2 bolt pattern. Since axles can vary depending on the manufacturer, as long as your current spindle is a #42 and/or uses the correct bearing, races, and seals, then these disc brakes will be the perfect upgrade for you. The correct bearings, races, and seals are as follows:
Bearings (sold separately)
Inner... view full answer...
We have several trailer hub options with the 5 on 4-1/2 bolt pattern and bearings L68149 and L44649. For an idler hub there are 2 options. We have a standard hub, # 84545BX, which includes the bearings, races, seal, grease cap, and lug nuts.
There is also an EZ lube version of the same hub if you have an EZ lube axle. It is # 84545UC1-EZ. It also includes the bearings, races, seal, grease cap, and lug nuts. view full answer...
Go To Results